Your Location: Home > News > Details

RHY mine evaluation ant mining machine T15

2019-01-10 18:06

In the field of mining, the 7nm chip mining machine is very eye-catching. Since the introduction of 7nm chip Avalon mining machine, the company has not been left behind. In November 2018, it launched its first model with 7nm. After the introduction of the chip ant mining machine T15, the ant mining machine T15 continued to write the king's performance of the ant mining machine with its sustainability and super energy-saving level. 


Converging the full range of technology evolution in Bitland, the T15 supports the SHA256 mining algorithm, allowing miners to enjoy a new mining experience with high performance and low power consumption. The following RHY mine will bring you a detailed evaluation of the T15 to understand the performance of the T15 mining machine.

e082d39b-1f27-429e-b7a3-3fe722b56501_540.png

Product basic data


Name: Ant Mining Machine T15


Algorithm: SHA256 algorithm


Weight: 7.0kg


Mining machine size: 221 mm (L) * 175 mm (W) * 279 mm (H)


Rated calculation power: standard mode: 23TH/S±2%


Low power mode: 17.5TH/S±2%~21TH/S±2%


Rated power consumption


Standard mode: 1541W ± 7%


Low power mode: 1050W ± 7% ~ 1260W ± 7%


The ant mining machine T15 is packed in five-layer industrial carton. The protective layer of the mining machine is made of pearl cotton board, which can effectively guarantee the transportation safety of the mining machine and reduce the collision during transportation. In addition to the mining machine, a copy of the mining machine's Chinese and English instructions is attached to the box.


There are two cooling fans on the front of the T15. Similar to other mining machines, the network cable interface, reset button, IPReport button and status indicator of the miner can be seen from the front of the miner.


The back of the mining machine is a honeycomb cooling net, and the T15 is designed as an all-in-one machine. The power of the mining machine is anchored on the side of the mining machine.


Installation and commissioning


This time, the test was chosen to be tested in the office. The room temperature was 26 degrees and the tank was selected for the ant mine pool. The wiring of the T15 is very simple, just connect the network cable and the power cord.


After the wiring is completed, the mining machine is started to be energized. Wait a few minutes. After the green light of the mining machine starts to flash, start to find the mining machine IP and enter the mining machine management background. Fill in the mining pool mining service address in the URL. The miner is filled with your miner number. The password field does not need to be changed. Click Save to complete the setting and the mining machine starts working.


Noise and temperature


After the mining machine was running stably for a period of time, let's measure the noise. The noise of the mining machine was about 76 decibels at a distance of 10 cm from the air inlet of the mining machine.


Using the temperature tester, the inlet air inlet temperature was about 28.4 degrees, and the air outlet temperature was about 37.9 degrees.


As can be seen from the back of the mining machine, we can see that the temperature of the power board is in the range of 47 degrees to 65 degrees, and the chip temperature is in the range of 62 degrees to 80 degrees.


Computing power and power consumption


According to the PPS+ mining income model of the ant mine pool, in the standard mode, the profit of a T15 24 hours a day is 0.0011 BTC. In the low power mode, the profit of a T15 24 hours a day is 0.0009 BTC. Here to remind everyone that the mining machine revenue is adjusted with the difficulty of mining.


Evaluation summary


Standard mode actual one-day gain: 0.0011 BTC


Standard mode actual power consumption: 1524W


Low-power mode actual one-day gain: 0.0009BTC


Low power mode actual power consumption: 1287W


Noise: 76 decibels



In the field of mining, the 7nm chip mining machine is very eye-catching. Since the introduction of 7nm chip Avalon mining machine, the company has not been left behind. In November 2018, it launched its first model with 7nm. After the introduction of the chip ant mining machine T15, the ant mining machine T15 continued to write the king's performance of the ant mining machine with its sustainability and super energy-saving level. Converging the full range of technology evolution in Bitland, the T15 supports the SHA256 mining algorithm, allowing miners to enjoy a new mining experience with high performance and low power consumption. The following RHY mine will bring you a detailed evaluation of the T15 to understand the performance of the T15 mining machine.


E082d39b-1f27-429e-b7a3-3fe722b56501_540.png


Product basic data


Name: Ant Mining Machine T15


Algorithm: SHA256 algorithm


Weight: 7.0kg


Mining machine size: 221 mm (L) * 175 mm (W) * 279 mm (H)


Rated calculation power: standard mode: 23TH/S±2%


Low power mode: 17.5TH/S±2%~21TH/S±2%


Rated power consumption


Standard mode: 1541W ± 7%


Low power mode: 1050W ± 7% ~ 1260W ± 7%


The ant mining machine T15 is packed in five-layer industrial carton. The protective layer of the mining machine is made of pearl cotton board, which can effectively guarantee the transportation safety of the mining machine and reduce the collision during transportation. In addition to the mining machine, a copy of the mining machine's Chinese and English instructions is attached to the box.


There are two cooling fans on the front of the T15. Similar to other mining machines, the network cable interface, reset button, IPReport button and status indicator of the miner can be seen from the front of the miner.


The back of the mining machine is a honeycomb cooling net, and the T15 is designed as an all-in-one machine. The power of the mining machine is anchored on the side of the mining machine.


Installation and commissioning


This time, the test was chosen to be tested in the office. The room temperature was 26 degrees and the tank was selected for the ant mine pool. The wiring of the T15 is very simple, just connect the network cable and the power cord.


After the wiring is completed, the mining machine is started to be energized. Wait a few minutes. After the green light of the mining machine starts to flash, start to find the mining machine IP and enter the mining machine management background. Fill in the mining pool mining service address in the URL. The miner is filled with your miner number. The password field does not need to be changed. Click Save to complete the setting and the mining machine starts working.


Noise and temperature


After the mining machine was running stably for a period of time, let's measure the noise. The noise of the mining machine was about 76 decibels at a distance of 10 cm from the air inlet of the mining machine.


Using the temperature tester, the inlet air inlet temperature was about 28.4 degrees, and the air outlet temperature was about 37.9 degrees.


As can be seen from the back of the mining machine, we can see that the temperature of the power board is in the range of 47 degrees to 65 degrees, and the chip temperature is in the range of 62 degrees to 80 degrees.


Computing power and power consumption


According to the PPS+ mining income model of the ant mine pool, in the standard mode, the profit of a T15 24 hours a day is 0.0011 BTC. In the low power mode, the profit of a T15 24 hours a day is 0.0009 BTC. Here to remind everyone that the mining machine revenue is adjusted with the difficulty of mining.


Evaluation summary


Standard mode actual one-day gain: 0.0011 BTC


Standard mode actual power consumption: 1524W


Low-power mode actual one-day gain: 0.0009BTC


Low power mode actual power consumption: 1287W


Noise: 76 decibels